|
RAC Inspections Checklist |
- Check engine oil level for correct level and dipstick oil sample is free from contamination
- Check coolant for correct level and that coolant is free from visual contamination
- Check screen wash to correct level
- Check engine compartment for visual evidence of all fluid/fuel leakage
- Check brake/clutch fluid level to manufacturer’s specification
- Check power steering fluid level to manufacturer’s specification
- Check condition/adjustment of visible drive belts
- Check condition of engine compartment pipes and hoses
- Check condition of engine mountings
- Check battery is secure and starts engine with ease
- Check vehicle charging system
- Check body/chassis for excess corrosion and chassis is free from extensive structural repairs
- Check exhaust system for security and ensure free from gas leakage/excess corrosion
- Visual check of steering rack for leakage/mountings and test for any excess free-play
- Visual check of steering rods, joints and gaiters for excess component free-play/leakage
- Braking system – visual check component condition, leakage and test for any excess component free-play
- Suspension (front) – visual check component condition, leakage and test for any excess component free-play
- Suspension (rear) – visual check component condition, leakage and test for any excess component free-play
- Gearbox – visual check for leakage, linkages,mounting condition and backlash
- Final drive – visual check for security excess free-play and any leakage
- Prop shaft – check for security and excess free play
- Check underside for any evidence of fluid/fuel leakage
- Check underside pipes/hoses for condition
- Check all previous structural body repairs/accident damage has been repaired satisfactorily
- Check body panel/alignment
- Check all locking systems operate correctly
- Check road wheels are free from visual damage, i.e. kerb damage (including wheel rims)
- Check tyres meet legal requirements and have minimum tread depths of 2mm
- Check jack and wheel brace present and intact
- Check windshield and other glass for damage, i.e. chips and excessive scratches
- Check visible areas of wiring for damage and security
- Check lights and indicators for operation, security and damage
- Check windscreen washers, wiper motors and wiper blades
- Check horn
- Check in-car entertainment – radio, tape, CD
- Check seat belts for condition and security
- Check dashboard warning lights for correct operation
- Check window and exterior mirror operations
- Check heater/air conditioning operation
- Check seat adjusters
- Check seat security/mountings
- Check general equipment, i.e. cigar lighter, gauges and sun visor etc.
- Check ease of engine starting and that the starter motor performs as expected when starting the engine
- Conduct Road Test:
- Check footbrake action for correct operation to ensure free from excess travel etc.
- Check handbrake action for correct operation to ensure free from excess travel etc.
- Check clutch and accelerator operation and pedal position
- Check clutch operation to ensure free from slip, drag, judder
- Check transmission for correct operation and gear selection
- Check engine performance
- Check for excess engine noise
- Check for excess smoke emissions from exhaust
- Check instruments and controls for correct operation
- Check for evidence of overheating
- Check steering wheel alignment
- Check general handling stability
- Check footbrake and handbrake performance
- Check hot restarting
- Check for oil and fluid leaks under bonnet after road tests
|
